I fitting the pressure cuff – Panasonic EW-BW10W User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I Fitting the Pressure Cuff
(cont.)
2. Firmly wrap and fasten using
the hoop and loop fastener.
• A loosely applied pressure
cuff will result in high blood
readings or incapable
measurement.
• Press fastener softly to avoid
the peel off.
Do not remove the hoop and loop
fastener by twisting it off.
Be sure to peel it in an horizontal
direction in alignment with the cuff.
<When wrapping around right wrist>
Fit as shown in the figure.
The cuff can be used on either wrist.
However, the difference in blood
pressure between the left and right
wrists may be around 10 mmHg, so
be sure to always use the same wrist
far measurements.
11