22 care and maintenance of your laser printer – Panasonic KX-P4440 User Manual
Page 116
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
7
Tighten the two green screws and re-install cleaning pad.
8
Re-install
developer
unit.
Re-install drum unit.
9
Close clamshell.
To resume printing, press the ON LINE key.
Notes:
• If stains appear on the back of printed paper after a paper jam is
cleared, it is recommended that you run several test prints. (Refer
to page 2-29 for test print.)
• After removing the jammed paper, open and close the printer once
to clear jam messages.
5.4 How to Adjust Print Density
Print density refers to the relative darkness of the print on the paper. The
print density dial is located on the left side of the printer.
Normal position is upright.
5-22 Care and Maintenance of Your Laser Printer