Panasonic KX-P4440 User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
2.5 Power On
1
Make sure the printer is plugged into a 3 prong AC socket. The following
procedures should be followed when turning the printer ON.
Plug the power cord into the outlet.
2
Turn the power ON.
The display will show:
WARM UP
00
After about 1.5 minutes, if the paper cassettes are not installed, the
display will show:
PAPER EMPTY U11
Refer to the next section, to install the paper cassettes.
Note:
If error messages other than
“PAPER EMPTY U11”
are displayed,
refer to Section 5.7 for clearing error messages.
2-14 Installation and Initial Setup
Advertising