Options installed at the factory before shipment – A&D Weighing GX-8000 User Manual
Page 88
86
AD-1683 DC static eliminator
z
Used to minimize weighing errors due to static electricity on the material.
AD-1684 Electrostatic field meter
z
This option measures the amount of the static charge on the sample, tare or peripheral
equipment and displays the result.
If those are found to be charged, discharge them using the AD-1683 DC static eliminator.
AD-1689 Tweezers for calibration weight
z
This option is used when calibrating the balance using an external weight.
Options installed at the factory before shipment:
GX-04 Comparator output with a buzzer / RS-232C / Current loop output
z
Used to compare weighing data and output the results.
GX-06 Analog output / Current loop output
z
Used to output the weighing data as an analog voltage.