Acura 2007 RL - Owner's Manual - Manual (Page 221)

To change channels, press the
TUNE button, or scroll down with
the interface selector, select TUNE,
and press ENTER on the selector.
Then turn the interface knob to the
desired channel. In the category
mode, you can only select channels
within that category. The scan function gives
you a sampling of all channels while
in the channel mode. In the category
mode, only the channels within that
category are scanned. To activate
SCAN, press the SCAN button. To
scan with the interface dial, scroll
down, and push interface selector to
the right. You will see SCAN on the
screen.
The system plays each channel in
numerical order for a few seconds,
then selects the next channel. When
you hear a channel you want to
continue listening to, press the
SCAN button or push the interface
selector to the right again.
CONTINUED
SCAN
Audio System
Fe
a
tu
re
s
219
TUNE ICON
Main Menu Table of Contents