Acura 2007 RL - Owner's Manual - Manual (Page 408)

Insert the new bulb into the hole,
and turn it one-quarter turn
clockwise to lock it in place.
Turn on the headlights to test the
new bulb.
(Driver’s side)
Reinstall the engine compartment
side cover.
Push the electrical connector back
onto the bulb. Make sure it is on
all the way.
Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
Push the bulb in slightly, and turn
it counterclockwise.
Reinstall the battery in the reverse
order of removal, and reinstall the
cover on the battery.
Remove the left or right side
engine compartment cover from
the side you are working on by
carefully pulling the cover out (see
page ).
If you are replacing a driver’s side
bulb, slide the battery toward the
engine to get more clearance (see
page
).
2.
1.
4.
5.
6.
7.
8.
3.
394
424
Lights
Replacing a Front Turn Signal/
Front Parking Light Bulb
406
SOCKET BULB
Main Menu Table of Contents