AERCO BMK 3.0 LN Dual Fuel July 2011 - Manual (Page 43)

INITIAL START-UP
4-11
AERCO recommends that you do not
change this code.
7. Press the SET button again to enter the
code. The first parameter label (SP) will
appear in the display.
8. Using the ▲ and ▼ arrow keys, select
parameter P1.
9. Press SET to view the value stored in
memory.
10. If the desired value is not displayed, modify
the setting using the ▲ and ▼ arrow keys.
The value can be changed from -10° to +10°
offset. Press SET to enter the value and exit
to the text parameter.
11. To exit the programming mode, press the
SET and ▼ buttons simultaneously, or
simply wait one minute and the display will
automatically exit the programming mode.
12. Once the programming mode has been
exited, the display will show the current
outlet water temperature of the boiler.