ALTANA Haze-Gard Plus Operating Instructions - Manual (Page 15)

delete all
delete last
statistic result
on/off on/off
operate set up reference
trans-
mittance haze clarity
delete all
delete last
statistic result
on/off on/off
H
1 4 . 7
A message on the display will tell you
if it is necessary to change measure-
ment ports (when multiple parame-
ters have been selected). Move the
specimen to the appropriate port and
start the measurement by pressing
the <operate> button or foot switch.
The readings will appear on the
display.
Control panel:
Cursor keys:
Used in SET-UP mode to select
individual menu items and set
values such as time (Chapter 6). In
any measuring mode, these keys are
used to switch statistics
functions on and off, and to delete
values from the statistics memory
(Chapter 7).