Crestron electronic DigitalMedia Repeater DM-DR - Manual (Page 5)

Crestron DM-DR DigitalMedia
™
Repeater
DigitalMedia
™
Repeater:
DM-DR
Introduction
The DigitalMedia
™
(DM) Repeater allows DM cable lengths to be
extended in up to 200 foot increments. Up to three repeaters may be
installed in a single DM cable run to enable cable lengths up to 450 feet.
Refer to the latest version of the Crestron
®
DigitalMedia Design Guide
(Doc. 4789) for more information about DM wiring. It is available from
the Crestron website (
www.crestron.com/manuals ).
The DM-DR does not simply boost the DM signal, but actually
reproduces a fresh signal to ensure error-free delivery to the following
device. Each DM Repeater mounts to a standard 2-gang, 85mm European
or 4 inch 1900 box electrical box or plaster ring, and extends one inch
(25.4 mm) from the wall surface when mounted.
Features and Functions
• Extends DigitalMedia or CAT5e/6 cable distance
• Regenerates HDMI signal
• Low-profile design
• Mounts to a 2-gang, European or 4 inch 1900 electrical box
Operations & Installation Guide – DOC. 6745A DigitalMedia ™ Repeater: DM-DR
• 1