AvMap GeoPilot Plus - Manual (Page 68)

68
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’ + “FIX SETUP” + ‘ENT’ + “DIFFERENTIAL
CORRECTION SOURCE” + ‘ENT’
Options are: NONE, WAAS, RTCM 100, RTCM 400, RTCM 4800, RTCM 9600, RTCM 1900,
RTCM 38400. The default setting is NONE. WAAS corrections are handled by the internal GPS
receiver and do not require additional equipment.
14.2.3 Fix Symbol
A flashing icon on the Moving Map displays the GPS position fix.
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’ + “FIX SETUP” + ‘ENT’ + “FIX SYMBOL”
+ ‘ENT’
This setting allows you to select among a Plane or Standard (circle with an “X”) icon. The default
setting is Plane.
14.2.4 Static Navigation
A GPS-receiver can produce speed settings that are minimal when standing still. The Static
Navigation sets a threshold for the speed. When the speed received from the positioning device is
under 0.89 knots, the GEOPILOT displays zero. The default setting is On.
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’ + “FIX SETUP” + ‘ENT’ + “STATIC
NAVIGATION” + ‘ENT’
14.2.5 Course Predictor
The GEOPILOT will display a line with a circle at the end to indicate the position your aircraft will
reach at the set time, based on current direction of travel and speed. This is continuously updated
to account for changes.
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’ + “FIX SETUP” + ‘ENT’ + “COURSE
PREDICTOR” + ‘ENT’
Setting options are: OFF, INFINITE, 1 MIN, 3 MIN, 6 MIN, 10 MIN, 30 MIN, 1 HOUR,  HOURS.
The default setting is 10 MIN.
14.2.6 head Up response
The Head Up Response is related to the Track-up mode of operation. When displaying the position
fix in Track-up, the setting selected here will enable the heading to vary +/- the degree selected
before the map is redrawn. A higher number here will result in less redraw time.
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’ + “FIX SETUP” + ‘ENT’ + “HEAD UP
RESPONSE” + ‘ENT’
Setting options are: +/-5, +/-10, +/-15, +/-45, +/-90. The default setting is +/-15.
14.3 ALArM SEt-UP
The GEOPILOT provides alarm settings for various functions. Here you can set the system for your
navigational requirements.
> ‘MENU’ 1 sec. + “SYSTEM SETUP” + ‘ENT’ + “ALARM SETUP” + ‘ENT’
14.3.1 Arrival Alarm radius
Specifies the radius of a circle around the Waypoint of a Route: when your aircraft reaches a point