AvMap GeoPilot Plus - Manual (Page 75)

75
15 oPErAtING rEqUIrEMENtS
The GEOPILOT must be connected to a 10–35 V DC power source and the antenna requires a
clear view of the sky in order to operate.
Fig. 15 - I/O Connector
Note
The cable that ends with wires is available as an optional part. Please contact your local C-MAP office for details.
15.1 ANtENNA ASSEMBLY & PLACEMENt
The antenna comes with a 5 meter cable with a SMB connector. The antenna is designed for use
inside the aircraft. It can be temporarily mounted on the aircraft’s dashboard using the included
velcro strip.
The antenna must have a clear view of the sky in order to receive satellite signals. GPS uses “line
of sight” signals to locate and track satellites. If the signals are obstructed by dense objects such as
aluminum, steel or even heavy ice, the GEOPILOT will not operate properly.
Signals may also be blocked by heated wind screens (fiberglass, plexiglass and other plastics are
nor-mally transparent to GPS signals).
The antenna can be mounted to any convenient surface that has a clear view of the sky. If you find
that the GEOPILOT does not locate and track satellites quickly or consistently, move the antenna.
Moving the location of the antenna a few inches often provides a better view of the sky.
15.2 SECUrING thE GEoPILot
The GEOPILOT was designed to be mounted with a suction cup mount that is included with the
unit. Simply attach the GEOPILOT to the suction cup mount,lightly securing it to your windscreen.
It may be necessary to lightly dampen the base of the suction cup before locking it.
Note
Suction Cup Mount may not be appropriate for your aircraft. Use care to ensure that the GEOPILOT does not
obscure the primary instruments or your field of view.