Blinds Chalet Good Housekeeping 2 Wood Blinds - Manual (Page 6)

6
OPEN THE INSTALLATION BRACKET DOOR LATCHES:
ƒ
Press up on the bracket bottoms while lifting the bracket doors open.
MOUNT THE HEADRAIL:
ƒ
Tilt the headrail slightly backwards to lower the back-side lip.
ƒ Slide the headrail into the brackets and push it all the way back.
ƒ The front lip of the headrail should hook to the center support lips.
VERIFY HEADRAIL FIT:
ƒ
If the headrail moves left or right more than 1/8”, adjust...
ƒ Using a flat head screwdriver, bend the end stiffener tabs out.
CLOSE THE BRACKET DOOR LATCHES:
ƒ
Snap the door shut over the locking tab to secure.
STEP 3: INSTALLING OPTIONAL COMPONENTS
With the blind properly mounted and in place, these optional components may
now be attached. They include the hold-down brackets and wand tilter (if
ordered).
ATTACH THE HOLD DOWN BRACKETS (if ordered):
ƒ
Attach brackets to the window sill or an outside surface.
ƒ Lower the blind, align bottom rail pins to the hole or hook.
ATTACH THE WAND (optional):
ƒ
Remove plastic sleeve from wand tip and slide it up the metal shaft.
ƒ Slip exposed wand hook through the tilter stem hole.
ƒ Push plastic sleeve back down and over the wand hook until secure.
ƒ Operate the wand by rotating between fingers.
2 hold down types