BMW 2013 3 Series User Manual

Page 146

Advertising
background image

rearview mirror. The required distance de‐
pends on the manual transmitter.

4.

Simultaneously press and hold the button of
the desired function on the hand-held trans‐
mitter and the button to be programmed on
the interior rearview mirror. The LED on the
interior rearview mirror will begin flashing
slowly.

5.

Release both buttons as soon as the LED
flashes more rapidly. When the LED is flash‐
ing faster, this indicates that the button on
the interior rearview mirror has been pro‐
grammed.
If the LED does not flash faster after at least
60 seconds, change the distance between
the interior rearview mirror and the hand-
held transmitter and repeat the step. Several
more attempts at different distances may be
necessary. Wait at least 15 seconds be‐
tween attempts.
Canada: if programming with the hand-held
transmitter was interrupted, hold down the
interior rearview mirror button and repeat‐
edly press and release the hand-held trans‐
mitter button for 2 seconds.

6.

To program other functions on other but‐
tons, repeat steps 3 to 5.

The systems can be controlled using the interior
rearview mirror buttons.

Special feature of the alternating-code

wireless system

If you are unable to operate the system after re‐
peated programming, please check if the sys‐
tem to be controlled features an alternating-
code system.
Read the system's operating manual, or press
the programmed button on the interior rearview
mirror longer. If the LED on the interior rearview
mirror starts flashing rapidly and then stays lit
constantly for 2 seconds, the system features
an alternating-code system. Flashing and con‐
tinuous illumination of the LED will repeat for
approximately 20 seconds.

For systems with an alternating-code system,
the integrated universal remote control and the
system also have to be synchronized.
Please read the operating manual of the system
being set up for information on how to syn‐
chronize the system.
Synchronizing is easier with the aid of a second
person.
To synchronize:

1.

Park the vehicle within range of the remote-
controlled system.

2.

Program the relevant button on the interior
rearview mirror as described.

3.

Locate and press the synchronizing button
on the system being programmed. You have
approx. 30 seconds for the next step.

4.

Hold down the programmed button on the
interior rearview mirror for approximately
3 seconds and then release it. If necessary,
repeat this work step up to three times in or‐
der to finish synchronization. Once synchro‐
nization is complete, the programmed func‐
tion will be carried out.

Reprogramming individual buttons

1.

Switch on the ignition.

2.

Press and hold the interior rearview mirror
button to be programmed.

3.

As soon as the interior rearview mirror LED
starts flashing slowly, hold the hand-held
transmitter for the system to be controlled
approx. 1 to 3 in/2.5 to 8 cm away from the
buttons on the interior rearview mirror. The
required distance depends on the manual
transmitter.

4.

Likewise, press and hold the button of the
desired function on the hand-held transmit‐
ter.

5.

Release both buttons as soon as the interior
rearview mirror LED flashes more rapidly.
When the LED is flashing faster, this indi‐
cates that the button on the interior rearview
mirror has been programmed. The system

Seite 146

Controls

Interior equipment

146

Online Edition for Part no. 01 40 2 903 880 - 07 12 490

Advertising