Boekel Scientific 230402-2 Big S.H.O.T. III - Manual (Page 4)

4

Before using any cleaning or decontamination method except those
recommended by the manufacturer, users should check with the
manufacturer that the proposed method will not damage the equipment.
2. Product Information
The Big SHOT III is a high capacity hybridization oven that can be utilized for all
your Southern, Northern and Western blotting needs. It will hold up to ten standard
35mm diameter by 300mm long bottles or twenty 150mm long bottles. Bottles are
available in four lengths
– 100, 150, 225 or 300mm. The Big SHOT can also be
adapted for use with 1.5/2.0mL, 15mL and 50mL conical centrifuge tubes (with
optional Carousel) or as a Platform Rocker to hold Tupperware

type containers
or heat sealed bags (with an optional platform attachment).
The Big SHOT III utilizes an adjustable speed Carousel and slight offset on its two
Spindles to provide the three-dimensional motion needed for excellent membrane
coverage. Forced air circulation coupled with microprocessor controlled
temperature control combine to provide unsurpassed temperature performance
and the most consistent conditions from procedure to procedure. Please note that
the convection fan operates continuously whenever the unit is turned on.
3. Assembly
3.1 Unpacking

Remove packing materials carefully, and retain for future shipment or
storage of the unit.

Inspect for damage. Report all shipping damage to the carrier
immediately. Shipping damage is covered by the carrier and
repair/replacement for shipping damages must be coordinated through the
carrier.

Complete and return the Warranty Registration Card.

Package should contain:
(1) Hybridization Oven
(1) Power line cord
(1) Operating instructions
(1) Hex Key
(1) Stainless Steel Drip Tray
3.2 Installation

Place the Big SHOT III on a flat and stable surface, preferably away from
drafts.

Fit the power line cord into the IEC power socket on the rear of the unit.