How the cycle works, Before you start, Using the self-cleaning cycle – Whirlpool FES355Y User Manual

Page 22

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

U S I N G T H E S E L F - C L E A N I N G C Y C L E

Using The Self-Cleaning

Cycle

In This Section

Page

Page

How the cycle works......................

Setting the controls...................

90

The Self-Cleaning cycle saves you from the toil and mess that often come with hand-cleaning the oven
interior. Like the other functions of your range, the Self-Cleaning cycle is operated with the easy-to-use
electronic controls. Please review the instructions in this section to keep your oven spotless.

How the cycle works

The Self-Cleaning cycle uses very high heat to
bum away soil and grease. During the cycle, the
oven gets much hotter than it does for normal
baking or broiling-approximately 875®F (468°C).
This high heat breaks up the soil or grease and
burns it away.

Your oven is preset for a 3-hour Self-Cleaning

cycle. However, the cycle time can be adjusted to
the amount of soil in your oven. The cycle can be
set anywhere between 2 and 4 hours. (See
“Setting the controls' on page 23.)

The graph at the right is representative of a

normal, 3-hour Self-Cleaning cycle. Note that the
heating stops when the 3-hour setting is up, but it

takes longer for the oven to cool enough to

unlock.

Before you start

Before you start the Self-Cleaning cycle, make
sure you:
1. Hand-clean the indicated areas. They do not

get hot enough during the cleaning cycle for
soil to burn away. Use hot water and detergent
or a soapy steel-wool pad for cleaning.
NOTE; DO NOT clean, move or bend the seal.
Poor cleaning, baking and roasting may result.

Time In Hours

22

Advertising