Special tips, Surface units and reflector bowls, Removing – Whirlpool FES355Y User Manual

Page 25: Caring for your range, Warning

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

C A R I N G F O R Y O U R R A N G E

Special tips

• Keep the kitchen well ventilated during the Self­

Cleaning cycle to help get rid of heat, odors and
smoke.

• After the oven is cool, wipe up any residue or

ash with a damp cloth.

• Clean the oven before it gets heavily soiled.

Cleaning a very soiled oven takes longer and

resuHs in rrK>re smoke than usual.

' If the Self-Cleaning cycle does not get the oven

as clean as you expected, the cycle may not
have been set long enough or you may not
have prepared the oven properly. Set the Self­
Cleaning cycle longer the next time and hand-

clean areas noted on page 22.

Caring For Your Range

In This Section

Page

Page

Surface units and reflector bowls____ ......... 25

Cleaning chart...... .........................._________ 28

Uft-up cooktop____________________ ____ 27

The oven light_________________

••••••••••••••••••a

29

Your range is designed for ease of care. Most
cleaning can be done wKh hems found around
your home. Cleaning your range whenever spills
or soiling occurs will help to keep h looking and
operating like new.

^WARNING

Burn and Electrical Shock Hazard

Make sure all controls are off and the range
is cool before cleaning or servicing.

Failure to do so could result in burns or

electrical shock.

Surface units and reflector bowls

Removing

1. Make sure all control knobs are turned off and

cool before removing surface unhs and
reflector bowls.

2. Lift the edge of the unh, opposite the recep­

tacle, just enough to clear the element hold­
down clip and the reflector bowl.

25

Advertising