Adjusting the refrigerator shelves, To remove the shelves, Removing the meat drawer and cover – Whirlpool 3ET16NK User Manual
Page 11: To remove the meat drawer, To remove the cover
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Adjusting the refrigerator shelves
Adjust refrigerator shelves to match the way
you use your refrigerator.
To remove the shelves:
1. Remove ail items from the shelf.
2. Slide shelf straight out to the stop.
3. Lift the front slightly.
4. Slide shelf out the rest of the way.
To replace the shelves:
1. Fit back of shelf on top of guide with wire
stops on the bottom of the guide.
2. Lift the front.
3. Slide shelf in until it clears all stops.
Wire stop
Guide stop
Sheif guide
Removing the meat drawer and cover
Remove the meat drawer and cover for
easier cleaning.
To remove the meat drawer:
1. Slide meat drawer out to the stop.
2. Lift the front of the meat drawer.
3. Slide meat drawer out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Remove meat drawer.
2. Push cover back to release the rear of
the cover from the shelf.
3. Tilt cover up at the front.
4. Pull cover forward and out.
To replace the cover:
1. Fit notches and rear edge of cover over
rear and center crossbars on the shelf.
2. Lower cover into place.
3. Replace the meat drawer.
Remove meat drawer before cover.
10