Installing it properly, Leveling it – Whirlpool 3ET16NK User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Installing it properly

1. Allow 1.25 cm (V

2

inch) space on each

side and at the top of the refrigerator for

ease of installation.

2. If the hinge side of the refrigerator is to be

against a wall, you might want to leave

extra space so the door can be opened

wider.

3. The refrigerator can be flush against the

back wall.

Leveling it

Your refrigerator has 2 front leveling

screws-one on the right and one on the left.

To adjust one or both of these, follow the

directions below.

1. Remove base grille. (See page 13.)

2. To raise front, turn screw clockwise.

3. To lower front, turn screw counterclock­

wise.

4. Check with level. .

5. Replace base grille. (See page 13.)

Front

roller

Right to

raise; ieft to

iower

Use a screw­

driver to adjust

Raise

Leveiing Lower

screw

Advertising
This manual is related to the following products: