Whirlpool SM988PEP - Manual (Page 11)

jCOUnb
dOLUn
The Display counts down the time
to show how much time is left In the
first cycle.
C -
J
L
/ /
U
When the cooking time ends, "End"
will show on the Display and 4 beeps
will sound. (You can stop the beeping
by opening the door or by touching
CANCEL.) "End" will remain on the Dis­
play until door is opened or CANCEL
is touched. The Display will then show
the time of day.
Changing the cooking time.
Cooking time can be changed any time before touching START or during the
cycle:
1. Touch COOK CYCLE 1
2. Touch numbers for new time.
3. Touch START.
Cook Cycie 1 will continue cooking for the new time.
Lower cook powers
For best results, some recipes call for lower Cook Powers. The lower the Cook
Power, the slower the cooking. Each Number Pad also stands for a different
percentage of Cook Power. Many recipes in your MICRO MENUS* Cookbook tell
you, by number, which Cook Power to use. Recipes in other books and maga­
zines may tell you by name (HI, MED, LO, etc.) or percentage (10%, 50%, 80%, etc.).
The following chart gives the percentage of Cook Power each Number Pad
stands tor, and Cook Power name usually used.
-Tmk.
automatic 100% of full power HIGH
9= 90% of full power
8 = 80% of full power
7 = 70% of full power MED-HIGH
6= 60% of full power
5 = 50% of full power MED
4 =
3 =
2 =
1 =
0 =
40% of full power
30% of full power MED-LOW
20% of full power
10% of full power LOW
no power (fan and light
will be off)
DO THIS... THIS HAPPENS...
1. Put food in the oven and close
the door.
2. Touch COOK CYCLE 1.
n n • n n
U U • U U
The COOK CYCLE 11ndicator Light will
come on and the Display will show
four O's.
11