Adjusting meat pan temperature, Adjusting the refrigerator shelves, To remove shelves – Whirlpool ED19EK User Manual
Page 6: To replace, Removing the erisper, meat pan and eovers, Removing freezer shelves, Ii i
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Adjusting meat pan temperature.
Cold air flows against the
meat pan through an opening
between the freezer and the
refrigerator. This helps keep the
meat pan colder than the rest
of the refrigerator.
Set the control to let more or
less cold air through.
Use Control to Adjust
Meat Pan Temperatures
Adjusting the refrigerator shelves...
Shelves can be adjusted to match the way you use
your refrigerator.
To remove shelves:
1. Tilt up at front.
2. Lift up at back,
3. Pull shelf straight out.
To replace:
1, Guide the rear hooks into the slots in the shelf
supports.
2, Tilt up front of shelf until hooks drop into slot. Lower
front of shelf to level position.
Removing the erisper, meat pan and eovers...
Removing Crisper and Meat Pan:
1. Slide crisper and meat pan straight out to stop,
2. Lift the front,
3. Slide the rest of the way out.
4. Replace In reverse order.
Removing Covers:
• Covers are held in place by two pegs at the back
and two notched tabs in front,
1. Press front tabs out of the way
2. Lift cover front,
3. Lift back off the pegs,
4. Replace in reverse order
Push the Tab
to Clear the Cover.
' I n
ii i -
Snap Back Into Place.
Removing freezer shelves...
1. Lift front slightly.
2. Lift back off supports.
3. Replace in reverse order.
Lift the Front
Then the Back