Operating your dryer, Starting your dryer, Stopping/restarting your dryer – Whirlpool 3396314 User Manual
Page 12: Selecting a cycle and setting
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Operating Your Dryer
The information in this section helps you learn to use your dryer efficiently and safely. Refer
to “Laundry Tips” on pages 16 and 17 for additional Information on sorting, loading, and
drying most types of washables.
NOTE: Before using your dryer, wipe the dryer drum with a damp cloth to remove dust from
storing and shipping.
Starting your dryer
Load clothes into the dryer and close 3. Push the Start Button.
the door.
2.
Turn the Cycle Control Knob to the de
sired cycle arxi setting. Use
the Energy Preferred Auto
matic Setting (•) to dry most
loads. See page 13 for descrip
tions of the cycles.
NOTE:
Your dryer stops
automatically when a cycle
erKls.
Stopping/restarting your dryer
You can stop your dryer anytime during a
cycle.
To stop the dryer, either:
• Open the dryer door
OR
• Turn the Cycle Control Knob to OFF.
NOTE: The Cycle Control
Knob should point to an OFp
area when the dryer is ix>t in
use.
To restart the dryer:
1. Close the dryer door.
2. Select a new cycle, if desired.
3. Push the Start Button.
Selecting a cycle and setting
Your dryer's Cycle Control Knob is shown
in the right colutm. Use the drying guide
lines and cycle descriptions on the foUowir^g
pages for help in selecting the right
drying cycles.
12