Délicates cycle, Soak cycle, Pre wash – Whirlpool 3396314 User Manual
Page 9: Super wash cycle, Using rinse and spin, Using drain and spin
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
O P E R A T I N G Y O U R W A S H E R
Délicates cycle
The Délicates cycle features a reduced
agitation speed for gentle soil removal. Low
spin speeds reduce wrinkling.
• Use 8 minutes of wash time to clean
delicate items and washable knits that are
moderately soiled.
• The washer pauses for 2 minutes during
the Délicates cycle.
Soak cycle
The Soak cycle features brief periods of
agitation and soak time to help renwve
heavy soils and stains that need pretreat
ment.
• Use warm water when soaking laundry.
(Hot water can set stains.) See pages 20
22 for stain removal information.
• Use the amount of detergent or presoak
additive recommended by manufacturer.
• After the 12-minute Soak cycle ends, add
detergent and set a new wash cycle.
Pre Wash
Pre Wash features a brief period of high
speed agitation to help remove heavy soils
and stains that need pretreatment.
• Use warm water for prewashing stained
laundry. (Hot water can set stains.) See
pages 20-22 for stain removal information.
• After Pre Wash ends, add detergent and
set a new wash cycle.
Super Wash cycle
The Super Wash cycle automatically pre
washes the laundry and advances into the
Regular wash cycle. (The washer does not
need to be reset after the Super Wash
cycle.) Use this 14-minute cycle when
washing heavily soiled loads that need
maximum soil removal.
• For proper cleaning, use double the
amount of detergent recommended for a
wash cycle.
NOTE: The washer pauses between the
Super Wash cycle arud the HEAVY part of
the Regular wash cycle. This is normal.
Using Rinse and Spin
When using extra detergent for heavily
soiled clothes, or washing special-care
items, you may want an extra rinse and spin.
1. Push in Cycle Control Knob and turn
clockwise to RINSE, as illustrated.
2. Pull out Cycle Control Knob. The washer
fills to selected load size, agitates, drains,
and spins.
Using Drain and Spin
A drain and spin may help shorten drying
times for some heavy fabrics or special-care
items by removing excess water.
1. Push in Cycle Control Knob and turn
clockwise to SPIN, as illustrated.
2. Pull out Cycle Control Knob. The washer
drains and then spins.