To remove door bins, Adjusting the refrigerator shelves, To remove a shelf – Whirlpool 4YED27DQDN00 User Manual
Page 11: To replace a shelf, Adjusting the door bins
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To remove door bins:
1. Lift bin up.
2. Pull bin straight out.
To replace door bins:
1. Slide bin in above desired support button.
2. Push down until it stops.
Adjusting the refrigerator shelves
Adjust the shelves to match the way you use
your refrigerator. Glass shelves are strong
enough to hold bottles, milk, and other
heavy food items.
To remove a shelf:
1. Remove items from shelf.
2. Tilt shelf up at front.
3. Lift shelf at back.
4. Pull shelf straight out.
Adjusting the door bins
(on some models)
Wire shelves
To replace a shelf:
1. Guide the rear shelf hooks into the slots
in the shelf supports on the back liner
wall.
2. Tilt front of shelf up until hooks drop into
slots.
3. Lower front of shelf to a level position.
NOTE: Glass shelves are heavy. Handle
them carefully.
To slide shelf out (on some models):
• Carefully pull front of shelf toward you.
To slide shelf in (on some models):
• Push shelf in until it stops.
10