Adjusting the crisper humidity control, On some models), Removing the meat drawer and cover – Whirlpool 4YED27DQDN00 User Manual
Page 14: To remove the meat drawer, To remove the cover, Adjusting the meat drawer temperature
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
i
Humidity Control
Adjusting the crisper humidity control
(on some models)
You can control the amount of humidity in
the moisture-sealed crispers. Adjust the
control to any setting between LOW and
HIGH.
• LOW (open) lets moist air out of the crisper
for best storage of fruits and vegetables
with skins.
• HIGH (closed) keeps moist air in the
crisper for best storage of fresh, leafy
vegetables.
Removing the meat drawer and cover
To remove the meat drawer:
1. Slide the meat drawer straight out to
the stop.
2. Lift the front slightly.
3. Slide out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Remove meat drawer and crisper.
2. Lift front of cover off supports.
3. Lift cover out by pulling up and out.
To replace the cover:
1. Fit back of cover into notch supports on
walls of refrigerator.
2. Lower front into place.
3. Replace meat drawer and crisper.
Pull out to the stop, lift the
front, and pull again.
Adjusting the meat drawer temperature
Cold air from the freezer flows into the meat
drawer. This helps keep the meat drawer
colder than the rest of the refrigerator for
better storage of meats.
Slide the control from side to side to let
more or less cold air through.
1 3