Setting the clock, Using the minute timer, N*iz u – Whirlpool FGP357Y User Manual

Page 11: U*u u, N*ri n

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

U S I N G Y O U R R A N G E

Setting the clock

When the range is first plugged in, or following a
power outage, “12:00” will flash in the display.

2

.

Slide the Clock/Timer Switch to the CLOCK

CLOCK

position.

TIMER

Push in and hold the Hour button until the

correct hour appears in the display. (The

numbers will only count forward.)

HOUR

Push in and hold the Minute button until the

correct minutes appear in the display.

®

MINUTE

Using the Minute Timer

The Minute Timer does not start or stop the oven.

It works like a kitchen timer. Set it in minutes up

to 1 hour, 59 minutes. The control will beep when
the set time is up.

1.

Slide the Clock/Timer Switch to the TIMER

position. The display will show “0:59"

(59 minutes).

n*IZ u

Ji

TIMER

2. To set a time nrare than 59 minutes, push

in and release the Hour button. The display

will show “1:59”. The time can now be ad­
justed down by pushing in and holding the

Minute button until the correct time shows in
the display.

To set a time less than 59 minutes, push in

and hold the Minute button until the correct
time shows in the display.

The Minute Timer will automatically start

when the Minute button is released.

3. When the set time has passed, the display will

show “0:00” and the control will beep continu­
ously. Slide the Clock/Timer Switch to the

CLOCK position to cancel the Minute Timer
and return to the clock mode.

HOUR

/•c

u

MNUTE

n*ri n

u*u u

11

Advertising