Spark igniter and electrodes, Burner grates, Grease troughs – GE ZGU364NRPSS User Manual

Page 15: Саге and cleaning

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Саге and Cleaning

Professional Rangetops

Spark igniter
and electrodes

The electrode of the electronic ignition system is

positioned at the rear of the burner base. When
cleaning the rangetop, be careful not to snag the
igniter with your cleaning cloth. Damage to the
igniter could occur.

Be careful not to push in a control knob while

cleaning. It could cause the igniter to spark.

Make sure that the white ceramic igniters on

the rangetop are dry and clean. Clean the metal

portion of the electrode with a soft cloth or
emery board.

Do not attempt to remove the electrode from

the rangetop.

Clean this metal part

with an emery board.

Do not clean this

white ceramic part

with an emery board.

Burner

grates

The enameled cast-iron burner grates should be

cleaned regularly.

The grates can be cleaned in the dishwasher.
The frames may be cleaned by hand or in the

dishwasher.
Wash them in hot soapy water, rinse, and dry

thoroughly.

Although they are durable, the grates will
gradually lose their shine, regardless of the

best care you can give them. This is due to their
continual exposure to high temperatures.

Do not operate a burner for an extended
period of time without cookware on the grate.

The finish on the grate may chip without

cookware to absorb the heat.

For stability, the frames have rubber pads on

each corner. During cleaning and use, be careful
not to damage or snag rubber pads.

Grease

troughs

(on some models)

Grease from the griddle and the grill will drain
into the enameled cast-iron grease troughs at

the front of the rangetop. Once the troughs have

cooled, they may be lifted out for easier cleaning.

To remove the cool grease trough from the

griddle, slide it toward the front and lift up.

To remove the cool grease trough from the

grill, lift the grill frame and lift out the trough.

Do not allow grease to accumulate in the grease

troughs as it can be a fire hazard. Clean the

grease troughs as soon as they are cool. The
grease troughs can be cleaned by hand with
hot soapy water or in the dishwasher. Wipe any
spillage in the trough basin with a soft cloth.

For stability, the troughs have rubber pads at the

front. Be careful not to damage the pads when

removing for cleaning.

Grease troughs

15

Advertising
This manual is related to the following products: