The problem solver, Possible cause – GE ZGU364NRPSS User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The Problem Solver
Professional Rangetops
PROBLEM
POSSIBLE CAUSE
BURNERS DO NOT
LIGHT OR SPARK
RANDOMLY
Electrical plug is not plugged into a live power outlet.
Gas not turned on.
Burner parts not replaced correctly.
Holes in the simmer rings or slits in the burner rings are clogged.
Clogged orifice, or wet burners or electrodes.
BURNERS HAVE
YELLOW OR
YELLOW-TIPPED
FLAMES
Burner parts not replaced correctly.
[MIIII]
A. Yellow flames: Call for B. Yellow tips on outer C. Soft blue flames:
cones: Normal for LP gas. Normal for natural gas.
service.
' If burner flames look like (A), call for service. Normal burner flames
should look like (B) or (C), depending on the type of gas.
BURNER FLAMES
VERY LARGE
OR YELLOW
' The rangetop may be connected to the wrong fuel type. Contact the
person who installed your rangetop or made the conversion.
BURNER CONTROL
KNOB WILL NOT
TURN
' When the knob is at the OFF position, it must be pushed in before
it can be turned, and it can only be turned in a counterclockwise
direction. When the knob is at any other position, it can be turned
in either direction without being pushed inwards.
18