Label the jacks at each location, If you have difficulty in identifying wall jacks, If you are installing new wiring and jacks – GE Feb-50 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4 incoming lines with
3 wall jack
4 incoming lines with
4 wall jacks
LINE 1-2
RJ14 JACK
LINE 1
RJ11 JACK
LINE 3
RJ11 JACK
LINE 2
RJ11 JACK
LINE 4
RJ11 JACK
LINE 3
RJ11 JACK
LINE 4
RJ11 JACK
Label the jacks at each location.
Identifying and labelling each jack at each location is also critical. To do
so, simply take a felt tip pen and write the information on the jack plate.
If you have difficulty in identifying
wall jacks.
Call the vendor who installed the inside wiring and ask for assistance in
identifying your existing wiring system and jacks.
If you are installing new wiring and jacks.
If the telephone wiring and modular jacks need to be installed, install
two-line RJ14 jacks at each telephone location. Each RJ14 jack accom
modates two telephone lines. If 3 or 4 lines are to be used, two
modular jacks will be needed for each telephone.