Install desk or table top telephones – GE Feb-50 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

3

.

Install Desk or

Table Top Telephones

IMPORTANT: Telephone line cords must be con­
nected (Steps D through F) before AC power con­

nection is made (Step G). Please follow these steps

in their proper sequence.

The GE 2-9450 telephone has been factory

assembled for use on a desk or table.

A. Remove the clear ACRYLIC COVER that covers

the MEMORY INDEX. Carefully remove the

MEMORY INDEX CARD and the OUlCK

REFERENCE GUIDE.

B. NOTE: THIS STEP IS ESSENTIAL.

You must install a 9V Alkaline Battery. It provides

back-up power to preserve numbers in memory

and any other stored information in the event of

any interruption of AC power to the telephone.
More importantly it allows use of the phone

during power outages.

Unscrew the BATTERY COVER. Pull the battery re­

moval ribbon so that it extends out of the top of the bat­

tery compartment. Insert a 9V Alkaline Battery
(Not Provided) and replace the BATTERY COVER.

C. In pencil, write in all the users’ names you’ve list­

ed on the worksheet under the appropriate station
numbers on the MEMORY INDEX CARD. Replace

the QUICK REFERENCE GUIDE, MEMORY IN­

DEX CARD and the ACRYLIC COVER.

□.Connect one end of a LONG TELEPHONE LINE

CORD to the jack on the back of the telephone
labelled LINE 1-2. Connect the other end to the

jack(s) labelled 1 & 2 either:

1. directly to the wall jack if it is a two-line RJ14

jack.

OR

2. to a two line adapter (not provided) if you have

two single line RJ11 jacks for lines 1 & 2. Con­

nect the adapter to the wall jacks with short

telephone line cords (Not Provided).

.■-"/a

cn

CD

n

CD

n

^ a

O

■' CD

cn

..-CD

n

n

>

a

n

Advertising