Cisco 1751 - Manual (Page 40)

Chapter 2 Installation
Optional Installation Steps
2-12
Cisco 1751 Router Hardware Installation Guide
78-11258-04
Follow these steps to connect a modem to the router:
Step 1 Connect one end of the cable to the black AUX port on the router rear panel. (See
Figure 2-6 .)
Step 2 Connect the adapter labeled Modem to the other end of the cable.
Step 3 Connect the DB-25 end of the adapter to the modem.
Figure 2-6 Connecting a Modem to the Router
+5, +12, -12
VDC
CONS OLE
AUX
Model Cisco 1750
10/100 E THERN ET
SEE M ANU AL B EFOR E IN STAL LATIO N
VIC 2FXO
PVDM O K
MOD O K
SLOT 1
SLOT 2 OK
FDX
SLOT 0 OK
SLOT 1 OK
100 LINK
SLOT 2
THIS S LOT ACCE PTS ONLY VOIC E INTERF ACE CARD S
SLOT 0 1
IN USE
0
IN USE
SEE M ANU AL B EFOR E IN STAL LATIO N
VIC 2FXS
1
IN USE
0
IN USE
Modem cable
AUX port (RJ-45)
Modem
46568
DB-9-to-DB-25 adapter
EIA/TIA-232