Stitch selector (how to select stitches) – Kenmore 385.162213 User Manual
Page 44
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
stitch Selector (how to select stitches)
(T) Sewing guide display
(D Red indicator
(D
Stitch seiector
Turn the stitch seiector until the red indicator reaches the
desired stitch.
The bottom row of stitches on the pattern indicating panel is
selected when the stitch length control is set at the stretch
stitch position.
Recommended stitch width, stitch length are shown in the
sewing guide display.
When you turn the stitch seiector, the information in the
display changes automatically
Use the color in the sewing guide display which corresponds
to the color of the selected stitch
NOTE:
To avoid needle or fabric damage, make sure the needle
is up and out of the fabric while selecting a stitch.
Stitch patterns are color-coded to a recommended setting
zone at the stitch length control.
Stitch Length Zones:
Red:
Straight, Zigzag and Utility stitches
Green:
Geometric decorative stitches
Blue:
Built-in buttonhole
Gold:
Stretch stitches
NOTE:
Only the stretch stitch is available in pattern #9. Set the
stitch width control at S S...
32