Setting oven controls, Instructions, Press – Kenmore 790.7755 User Manual

Page 28: Display, To set add 1 minute feature, Setting add 1 minute feature, N rc, 30 en

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising

Setting Oven Controls

•

Setting Convection Convert Feature

•

Setting Add 1 Minute Feature

To set the Convection Convert feature

The

CONV CONVERT pad is used to automatically convert a standard Baking recipe for convection baking. When

set properly, this feature is designed to display the oven set converted (reduced) temperature in the display.

Convection Convert MUST be used with a Convection Bake keypad. Cook Time or Delay Start functions may be added.

INSTRUCTIONS

Using Convection Convert feature to adjust oven

temperature from a Bake recipe (example below
when setting oven for 350°F):

1. Arrange interior oven racks and place food in oven.

2. Press

(See Fig. 1). If a Cook Time or a Delay Start

is desired, enter the times now.

/'TonvA

Press 'conwrt ■ "CONV BAKE" and the oven set temperature

adjustment will appear in the display (for this example it is
325°F). A beep will sound once the adjusted oven set
temperature is reached. (See Fig. 2).

Notes: When used with a Cook Time or a Delay Start setting,

the Convection Convert feature will display a "CF" for check food
when the bake time is 75% complete (See Fig. 3). At this time the
oven control will sound 3 long beeps at regular intervals until baking

has finished. When the bake time has completely finished the
control will display "End" and will sound 3 long beeps every 30

seconds until the pad is pressed (See Fig. 4).

The oven icon will show a rotating fan within the square. This

rotating fan icon indicates when the Convection Fan is operating
(See Figs 2 or 3)

Press to cancel Convection feature at any time.

Note: The minimum amount of cook time using the Convection

Convert feature with a Cook Time or a Delay Start function is

2 0

minutes.

PRESS

■XonW

. Bake '

Convert

DISPLAY

Fig. 1

30 3351®

Fig. 2

n rc

L I ^

Fig.3

30 En

Fig. 4

To Set Add 1 Minute Feature

The (^|) keypad is used to set additional minutes to the Timer. Each time the pad is pressed, another minute is

added. If the Timer is not active and the(^^|) key pad is pressed, the Timer feature will become active and will begin

counting down from 1 minute. When the Timer reaches the end of the set time, “End” will display and signal 3 long beeps

at regular intervals until (li® j is pressed again.

Advertising