Kenmore 790.7755 - Manual (Page 5)

GROUNDING INSTRUCTIONS
See the INSTALLATION INSTRUCTIONS packaged with this range for complete installation and grounding instructions.
For personal safety, the range must be properly grounded. For maximum safety, the power cord must be plugged Into an electrical
outlet that Is correctly polarized and properly grounded.
Important Safety Notice
The California Safe Drinking Water and Toxic Enforcement Act requires the Governor of California to publish a list of
substances known to the state to cause cancer, birth defects or other reproductive harm, and requires businesses to warn
customers of potential exposure to such substances.
important Safety instructions
Gas Conversion
IMPORTANT NOTICE:
This appliance is factory pre-set to operate on Natural (Nat.)
Gas ONLY.
Do not attempt to convert this appliance to L.P. (Liquefied
Petroleum) Gas.
iiWARNING Personal injury or death from
electrical shock may occur if the range is not installed
by a qualified installer or electrician.
iiWARNING
I Any additions, changes or conversions
required in order for this appliance to satisfactorily
meet the application needs must be made by Sears
Service.
Serial Plate Location
You will find the model and serial number printed on the serial plate. The
serial plate is located on the right side of the oven front frame behind the
warmerdrawer or storage drawer panel.
Rememberto record the serial numberforfuture reference.
_
Serial plate location;
Open the Warmer Drawer
or Storage Drawer.
f
Before Using Your Range
Remove all tape and packaging before using the range. Destroy the carton and plastic bags after unpacking the range. Never
allow children to play with packaging material.
Discard all packing material located under Burner Heads (Center Burner only).
Unpack the burner grates and position on the cooktop.
Be sure to follow the installation instructions before installing and using your new range.
Read all instructions before using this appliance. Save these instructions for future reference.