Setting oven controls, Consumer defined control features, Instructions – Kenmore 790.75603 User Manual
Page 18: Press, For 7seconds, Display, Before setting oven controls
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting Oven Controls
Consumer Defined Control Features
Setting Temperature Display — Fahrenheit or Celsius
The BROIL
b
™! and FLEX CLEAN pads control the Fahrenheit or Celsius temperature display modes. The
oven control can be programmed to display temperatures in Fahrenheit or Ceisius. The oven has been preset at the
factory to display in Fahrenheit.
INSTRUCTIONS
To change display from Fahrenheit to Celsius or
Celsius to Fahrenheit
1. To tell if the display is set for Fahrenheit or Ceisius press ( Brail)
(Figure 1) and hold for 7 seconds; "550°" will appear and
"BROIL" will flash in the display and a beep will sound. If "F"
appears, the display is set to show temperatures in Fahrenheit
(Figure 2). If "C" appears, the display is set to show
temperatures in Celsius (Figure 3).
Pt"®ss to switch between Fahrenheit or Ceisius display
modes. The display will show either "F" (Figure 2) or "C"
(Figure 3).
PRESS
{ Broiiy
for 7seconds
DISPLAY
(on ccn
h J U D J U
Figure 1
Figure 2
2
.
3. Press START to accept the change or press (^
stop
J to reject the
change.
START or (STOP
Figure 3
18