Liquid chiorine bieach compartment, Fabric softener compartment, Adding items – Kenmore 110.4597 User Manual

Page 14: Ciothes ciean, Locking controis, Door lock

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Liquid chiorine bieach compartment

(Letter D in Dispenser lilustration)

Add NO MORE THAN Vs cup (80 mL) liquid chiorine bleach to this
compartment. The bleach will be automatically diluted and
dispensed at the best time during the first rinse after the wash
cycle. This compartment cannot dilute powdered bleach.

Always measure liquid chlorine bleach. Use a measuring cup

with a pour spout; do not guess.

Do not fill beyond the “MAX” level.

NOTE: Overfilling could cause severe garment damage.

Fabric softener compartment

(Letter E in Dispenser Illustration)

Add Vi cup (60 mL) liquid fabric softener to this compartment.

Fabric softener will be automatically dispensed in the final rinse.

Do not fill beyond the “MAX” level.

1. To pause the washer at any time, select PAUSE/CANCEL.

2.

To continue the cycle, select and hold START (for

approximately 1 second).

Not all Options and Modifiers are available with all Cycles.
Cycles, Options and Modifiers can be changed anytime before
START is selected.

Options and Modifiers can be changed anytime after START is
selected and before the start of the selected Option or Modifier.

To cancel a cycle and select a new cycle

1,

2,

3,
4,

Select PAUSE/CANCEL twice.

Select desired cycle.

Select the desired OPTIONS or MODIFIERS.

Select and hold START (for approximately 1 second) to restart

the washer at the beginning of the new cycie.

To cancel a cycle

1. Select PAUSE/CANCEL twice.

2.

The washer powers down, the door unlocks, and clothes can

be removed.

NOTE: If the water level or the temperature is too high, the

washer will drain automatically before the door unlocks.

To change Options and Modifiers after the cycle has started

1. Select PAUSE/CANCEL.

2.

Select the desired OPTIONS or MODIFIERS.

3.

Select and hold START (for approximately 1 second) to

continue the cycle.

To drain the washer manually

1. Select PAUSE/CANCEL.

2.

Select DRAIN & SPIN.

3.

Select and hold START (for approximately

1

second) to begin

the drain.

4.

When the spin is complete, the door unlocks. Items can be

removed from the washer.

These lights show which portion of the cycle the washer is
operating. They also indicate when you can add an additional

item to the wash cycle and when the controls are locked.

Smrys

A

dda

G

armen

.1*

PREVAASH*

W

ash

*

R

inse

#

SPIN •

C

lothes

C

lean

CONTROL LOCKED •

DOOR LOCKED #

Adding items

This washer aliows an 8-minute period in which forgotten
garments may be added to the load. You can add items to the
washer, If the ADD A GARMENT status light is glowing.

To add items

1. Select PAUSE/CANCEL. The washer door unlocks, and items

can be added.

2.

To continue the cycle, close the door and select and hold

START (for approximately 1 second).

3.

To unlock the door after the Add a Garment period, press

Pause/Cancel twice. This will cancel the Wash Cycle.

Ciothes Ciean

The Clothes Clean light stays on for 5 minutes after the cycle is
complete. The washer will then power down.

Locking controis

The Control Lock prevents unintended use of the washer. You
can also use the control lock feature to prevent unintended cycle
or option changes during a cycle. When CONTROL LOCKED is

lit, all buttons are disabled except for Pause/Cancel and Start.
You can lock the controls while the washer is operating.

To lock the controls
Select and hold DRAIN & SPIN for 3 seconds.

DRAIN &SPIN

PRESS a HOLD 3

StCONDS TO LOCK /

UNIOCK CONTROL

The CONTROL LOCKED status light glows.

To unlock the controls
Select and hold DRAIN & SPIN for 3 seconds until the CONTROL

LOCKED Status light turns off.

Door Lock

When the DOOR LOCKED status light glows, the door is locked.

Estimated Time Remaining

The cycle times vary automatically based on your water pressure,
water temperature, detergent, and clothes load. The cycle time
will be extended if oversudsing occurs or the load is unbalanced.
The SUDs routine removes extra suds and assures proper rinsing
of your garments. During the unbalance routine the time
displayed may pause until this activity is complete, then resume
with the remainder of the cycle.

14

Advertising
This manual is related to the following products: