Oven cleaning, Stopping or interrupting a self-cleaning cycle, Adjusting oven temperature – Kenmore 790.4906 User Manual
Page 28: Instructions, To adjust the oven temperature higher, Press, Display, To adjust the oven temperature lower, Adjusting the oven temperature
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Oven Cleaning
INSTRUCTIONS
PRESS
DISPLAY
Stopping or Interrupting a Self-Cleaning Cycle:
If it becomes necessary to stop or interrupt a self-cleaning cycle
due to excessive smoke or fire in the oven:
1. Press I
2. Once the oven has cooled down for approximately 1 HOUR
and the "LOCK" is no longer displayed, the oven door can
Figure
1
then be opened (Figure 1).
Note: If your clock is set for normal 12 hour display mode the Delayed Self-Clean cycle can never be set to start more
than 12 hours in advance. To set for Delayed Self-Clean Cycle 12-24 hours in advance set the control for the 24 hour
time of day display mode.
Adjusting Oven Temperature
The temperature in the oven has been pre-set at the factory. When first using the
oven, be sure to follow recipe fimes and temperatures. If you think the oven
temperature is cooking too hot or too cool for the temperature you select, you can
adjust the actual oven temperature to be more or less than what is displayed. Before
adjusting, test a recipe by using a temperature setting that is higher or lower than the
recommended temperature. The baking results should help you to decide how much of
an adjustment is needed.
INSTRUCTIONS
To adjust the oven temperature higher
1. Press
for 6 seconds (Figure 2).
2. To increase the temperature use the number pads to enter the
desired change. (Example 30°F) d)® (Figure 3). The
temperature may be increased as much as 35°F (19°C).
3. Press
or
to accept the temperature change and
the display will return to the time of day (Figure 4).
PRESS
(D®
or
Note:
The oven
temperature adjustments
made with this feature will
not change the Self-Clean
cycle temperature.
DISPLAY
Figure 2
Figure 3
To adjust the oven temperature lower
1. Press (^
ba
^ for 6 seconds (Figure 5).
2. To decrease the temperature use the number pads to enter
the desired change. (Example -30°F)
and then
press
(Figure 6). The temperature may be decreased
as much as -35°F (-19“C).
3. Press
or to accept the temperature change and the
display will return to the time of day (Figure 7).
S
tart
)
or
Figure 4
Figure 6
Figure 6
Figure 7
28