Generai care & cleaning, Cooking table, Changing the oven light – Kenmore 790.4906 User Manual

Page 31

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Generai Care & Cleaning

and remove it.

Halogen
Light Bulb

Changing the Oven Light

An interior oven light will turn on automatically when the oven door is
opened. The oven light may be turned on when the door is closed by using
the oven light switch located on the control panel.
The lamp is covered with a glass shield. The glass shield can be removed
to be cleaned manually or to change oven light. THIS GLASS SHIELD

MUST BE IN PLACE WHENEVER THE OVEN IS IN USE.

To replace the light bulb:
CAUTION: BE SURE THE OVEN IS COOL

1

.

2

.

3.

5.

6

.

Turn the power off at the main source.
Wear a leather-faced glove for protection against possible broken glass.
To remove the glass shield, pull the back side of the shield toward the

inside of the oven in a manner to lift it up from the oven side.

The glass shield should come out easily by pushing a little toward front
of the range.

Replace halogen light appliance bulb taking care not to touch the bulb

with your bare fingers. Touching bulb with your skin can leave a film on
the bulb that causes it to burn out quickly.

Replace glass shield in opposite order and manner of removal.

Cooking Table

Food Type

Frozen foods, pies,

pastries and pizza

Refrigeratorcookies

Refrigeratorbiscuits

Rolls & Breads

Fresh Pies/Pastries

Decrease

in normal

cook times

15-25%

15-35%

15-30%

20-25%

10

-

20

%

Begin with the maximum reduction in cook time

and adjust as needed.

*Recommended reduction in cook time based on
brands of food items tested. Cook time may vary
with your specific brand of food item.

31

Advertising