Feature overview, To set the warmer drawer & bread proofing controls, Warmer drawer food temperature settings – Kenmore 790.9911. User Manual

Page 14: Preparing bread dough for the warmer drawer, Preparing bread dough in the warmer drawer, Setting warmer drawer controls

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Setting Warmer Drawer Controls

FEATURE OVERVIEW

Operating & Setting Warmer Drawer & Bread Proofing Features

Preparing Bread Dough for the Warmer Drawer

The control and indicator lights for the Warmer Drawer and Bread Proofing features

are located on the control panel. The temperatures are approximate, and are
designated by HI {high), MED (medium), LO (low) and PROOF BREAD.

Hl<

MED<

L0<

P

roof

B

read

o

To Set the Warmer Drawer & Bread Proofing Controls:

1. Touch the

pad at the Warmer Drawer control position. The Warmer

Drawer indicator light wifi flash. Note: If no further pads are touched within 25
seconds the request to power the Warmer Drawer ON wifi clear.

2. Set the desired power level. Touch

hi

once to turn ON the power level for

HI (Fig. 2) or Lo^V^ to turn ON the power level for LO (Fig. 4). The Warmer

Drawer indicator light will glow steady indicating the Warmer Drawer is ON.

3. Each touch of the

lo

or

hi

pads will decrease or increase through 6

power levels from HI (Fig. 2) to MED (Fig. 3) to LO (Fig. 4) and to the Bread
Proofing feature (Fig. 5). If the Warmer Drawer is set at the LO setting and the

Lo

C5)

pad is touched again the Bread Proofing feature will be turned ON (The

Bread Proof inidcator light will glow steady indicating the Bread Proofing feature
in ON (See Fig. 5 & bread dough preparation instructions on this page). To return

to standard Warmer Drawer settings touch

hi

pad at least once. Note: For

best results, preheat the Warmer Drawer before adding the food or bread dough.

An empty drawer will preheat In approximately 15 minutes.

3. When the food or dough Is ready for removal, touch the

pad once to turn

the Warmer Drawer or Bread Proof feature OFF. The Warmer Drawer indicator

light will turn OFF.

Warmer Drawer Food Temperature Settings

Use the recommended Warmer Drawer food temperature settings table (See page 13,
Fig. 5). If a particular food is not listed, start with the MED setting. If more crispness is
desired, remove the lid or aluminum foil from the food. Most foods can be kept at
serving temperatures on the MED setting. When a combination of foods are to be kept

warm (for instance, a meat with 2 vegetables and rolls), use the HI setting. To avoid

heat loss, do not open the Warmer Drawer repeatedly while in use.

Preparing Bread Dough for the Warmer Drawer

The Warmer Drawer has a "Proof Bread” feature that can be

used to help prepare bread dough. The recommended length of

;

time to keep the bread dough in the Warmer Drawer is about
45-60 minutes. Be sure however to follow the recipe’s

recommended times.

The prepared bread dough should be placed in a large bowl

because the dough will nearly double in volume. Arrange the

Warmer Drawer Rack in the downward position (See Fig. 6).

Place the bowl on the rack in the Warmer Drawer and follow the

Warmer Drawer and Bread Proof Control setting instructions at
the top of this page.

Note: The Warmer Drawer will not operate during the Self-Clean cycle.

O

n

/O

ff

W

armer

D

rawer

Fig.1

Hh

MED!

Lo ®

Fig. 2

P

roof

B

read

o

Hio

o

M

eds

>

&

Lo®

Fig.3

P

roof

B

read

o

H

i

o

Hio

o

o

M

edo

MEDO

o

P

roof

i

B

read

^

o

P

roof

B

read

Lo ®

o

Loo

•&

Fig. 4

Fig. 5

Warmer Drawer

Rack in downward

position

Fig. 6

14

Advertising