Kenmore 790.9911. - Manual (Page 32)

Oven Cleaning
FEATURE OVERVIEW
• Delayed Self-Clean Cycle (Cont’d.)
INSTRUCTIONS
Stopping or Interrupting a Seif-Cieaning cycie:
If it becomes necessary to stop or interrupt a Self-Cleaning cycie
due to excessive smoke or fire In the oven:
1. Press
PRESS DISPLAY
■
:30
Fig. A
2. Once the oven has cooled down for approximately 1 HOUR and
the "DOOR LOCKED" icon is no longer displayed, the oven
door can then be opened (Fig. A).
NOTE: If your clock is set for normal 12 hour display mode the Delayed Self-Ciean cycle can never be set to start
more than 12 hours in advance. To set for Delayed Self-Clean 12-24 hours in advance see page 17 for instructions to
set the control for the 24 hour time of day display mode.
Adjusting Oven Temperature
FEATURE OVERVIEW
The temperature in the oven has been pre-set at the factory. When first using the oven, be
sure to follow recipe times and temperatures. If you think the oven is too hot or too cool, the
temperature in the oven can be adjusted. Before adjusting, test a recipe by using a
temperature setting that is higher or lower than the recommended temperature. The baking
results should help you to decide how much of an adjustment is needed.
INSTRUCTIONS
To adjust the oven temperature higher:
1. Press for 6 seconds (Fig. 1 ).
2. To increase the temperature use the number pads to enter the
desired change. (Example 30°F) CD® (Fig. 2). The
temperature may be increased as much as 35°F (19°C).
3. Press to accept the temperature change and the
Note: The oven
temperature adjustments
made with this feature will
not change the Self-Clean
cycie temperature.
display will return to the time of day (Fig. 3). Press to
PRESS DISPLAY
1:30
DO'
® ®
FSg.1
1:30 30'
Fig. 2
VniamfJ
msm
reject the change if necessary.
To adjust the oven temperature lower:
1. Press ( ba ^ for 6 seconds (Fig. 4).
2. To decrease the temperature use the number pads to enter the
desired change. (Example -30°F) ®® and then
press (Fig. 5). The temperature may be decreased as
much as 35°F (19X).
3. Press to accept the temperature change and the
display will return to the time of day (Fig. 6). Press to
reject the change if necessary.
32
Fig.3
I
Figure 5
■■30
Figure 6