Kenmore 790.9911. - Manual (Page 20)

Consumer
Defined Control
Features
FEATURE
OVERVIEW
• Silent Control
Operation
S tart
T imed O ven
O ven C ook S tart
T ime T ime
fiiiiu SERVE CLEAN
8 8
:
8 8 1
Ж
ЛМЕО DELAY ЛМЕН n CONV
DOOR LOCKED CLEAN Ш MEAT MEATS CAKES BREADS
CONV droii PRE
BAKE liROIL HEAT
1
4
OVEN KITCHEN
O h /O ff O n /O ff
MEATS C akes breads
food C ategories
2
5
/ ......................
f C lot
л STOP
u C lear
Setting Silent Control Operation
The START TIME and CLEAN pads control the Silent Control operation feature. The Silent Control
operation feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the
control can be programmed for silent operation and later returned to operating with ail the normal sounds and beeps.
INSTRUCTIONS
To change control from normal sound operation to
silent control operation:
1. To tell if your range is set for normal or silent operation press
'S tant and hold ( jme J for 7 seconds. "0:00" will appear and
"DELAY" will flash in the display {Fig. 1).
2. Press to switch between norma! sound operation and
siient operation mode. The display will show either ”:SP" {Fig. 2)
o r { F i g . 3).
If ":SP" appears {Fig. 2), the controi wii! operate with norma!
sounds and beeps. I f a p p e a r s {Fig.3), the control is in
the silent operation mode.
4. Press to accept the change or press to reject the
change.
PRESS DISPLAY
for 7seconds
0:00
Fig.1
:5P
Fig. 2
20