Kenmore 790.9911. - Manual (Page 19)

Consumer Defined Control Features
FEATURE OVERVIEW
• Oven Lockout
• Temperature Display
Note: The Consumer Defined Control features are adjustments to the controi that wili not affect cooking results. These
include the ^ Oven Lockout, Temperature Display and Silent Control Operation features.
Setting Oven Lockout Feature
The pad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and
prevents the Warmer Drawer, cooktop and most oven controls from being turned ON. It does not disable the clock,
Kitchen Timer or the interior oven lights.
INSTRUCTIONS PRESS DISPLAY
for 3 seconds
for 3 seconds
To activate the Oven Lockout feature:
1. Press and hold for 3 seconds (Fig. 1).
2. After 3 seconds the lock icon light ( ^ ) will appear, a beep
will sound and "DOOR LOCKED" will flash in the display.
Once the oven door is locked the "DOOR LOCKED" indicator
will stop flashing and remain on along with the lock icon light.
To reactivate normal oven operation:
1. Press and hold for 3 seconds. A beep wili sound. The
"DOOR LOCKED" will continue to flash until the oven door
has completely unlocked and the lock icon light ( ^ ) will
clear (See Fig. 2).
2. The range is again fully operational.
Setting Temperature Display — Fahrenheit or Ceisius
The BROIL ( br ^ and CLEAN pads control the Fahrenheit or Celsius
temperature display modes. The oven control can be programmed to display
temperatures in Fahrenheit or Celsius. The oven has been preset at the factory to
display in Fahrenheit.
INSTRUCTIONS PRESS
To change display from Fahrenheit to Ceisius or
Celsius to Fahrenheit:
1. To tell if the display is set for Fahrenheit or Celsius press
( broi ^ (Fig. 3) and hold for 7 seconds; "550®" wili first appear
in the display and then a beep will sound. If "F" appears, the
display is set to show temperatures in Fahrenheit (Fig. 4). If
"C" appears, the display is set to show temperatures in
Celsius (Fig. 5).
2. Press to switch between Fahrenheit or Celsius display
modes. The display will show either "F" (Fig. 4) or "C" (Fig. 5).
3. Press to accept the change or press to reject the or
change.
19
( bro Í^ for /seconds
l:30
Fig.l
1:30
Fig. 2
DISPLAY
1:30
550’
Fig.3
1:30
Fig. 4
1:30
Fig. 5