Stitch selector {how to select stitches), Stitch length zones, Width – Kenmore 385.160201 User Manual
Page 40: T 0—1 —2—3—4, 2s.s, Length
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
stitch Selector {how to select stitches)
(T) Sewing guide display
(2) Stitch selector
@ Red dot
Raise the needle to the highest position, and select a pattern
by turning the stitch selector (2).
The red dot(3) matches the selected stitch.
Set the stitch length control at S.S. when using the stretch
stitch.
* WindowCi) shows the stitch number, foot number and stitch.
* Window® shows the desired stitch length for the
selected stitch.
* Window® shows the desired stitch width for the selected
stitch.
Stitch patterns are color-coded to a recommended setting
zone at the stitch length control.
STITCH LENGTH ZONES;
Red:
Straight, Zigzag and Utility stitches
Blue:
Built-in buttonhole
Gold:
Stretch stitches
G>
0-1-2-3=4=5=6.5
0 0
TT-----
6.5-
WIDTH
T----- 0—1 —2—3—4
STRETCH
2S.S,
LENGTH
IMJ
\
a
a
/
foot
1 2 3 4 5 BH 6 7 8 9 10 11 12
D
I . . 1 I
; l , 1 : I
<h c|i c|.
IIP 'III* =111
32