Track number indicator, Play time indicator, 1 press eject – Pioneer SUPER TUNERIII DEH-P8500MP User Manual

Page 18: 2 insert a cd into the cd loading slot, 3 use volume to adjust the sound level, A.1 ( built-in cd player, Playing a cd

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Section ________________________________________________

a.1 ( Built-in CD Player

3

c

Playing a CD

These are the basic steps necessary to play a

CD with your built-in CD player. More ad­

vanced CD operation is explained starting on
the next page.

® Track number indicator

Shows the track currently playing.

®

Play time indicator

Shows the elapsed playing time of the cur­

rent track.

1 Press EJECT.

CD loading slot appears.

■ After a CD has been inserted, press

SOURCE

to select the built-in CD player.

2 Insert a CD into the CD loading slot.

Playback will automatically start.

EJECT

button

■ You can eject a CD by pressing

EJECT.

■ If the front panel is in the eject position
(shown above), buttons other than

EJECT,

VOLUME, OPEN,

and

ATT

(on the remote con­

trol) do not operate.

3 Use VOLUME to adjust the sound level.

Rotate to increase or decrease the volume.

4 To perform fast forward or reverse,

press and hold ◄ or ►.

5 To skip back or forward to another

track, press ◄ or ►.

Pressing ► skips to the start of the next track.
Pressing ◄ once skips to the start of the cur­
rent track. Pressing again will skip to the pre­

vious track.

Notes

The built-in CD player plays one, standard, 12-

cm or 8-cm (single) CD at a time. Do not use
an adapter when playing 8-cm CDs.

Do not insert anything other than a CD into

the CD loading slot.

If you cannot insert a disc completely or if

after you insert a disc the disc does not play,
check that the label side of the disc is up.

Press

EJECT

to eject the disc, and check the

disc for damage before inserting the disc
again.

▲ and

T

can be operated when MP3 or WMA

is playing.
If the built-in CD player does not operate prop­

erly, an error message such as

ERROR-11

may be displayed. Refer to Understanding

built-in CD player error messages on page 49.

You can eject the CD by pressing and holding

EJECT

with eject position when the CD load­

ing or ejecting cannot operate properly.

When a CD TEXT disc is inserted, the disc and
track titles begin to scroll to the left auto­

matically,®

CD

En

Advertising