Remove the frame. (fig. 9), Fig. 10) (fig. 11), Installation – Pioneer SUPER TUNERIII DEH-P8500MP User Manual
Page 62: English
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installation
DIN Rear-mount
Installation using the screw holes on the side of the unit
1. Remove the frame. (Fig. 9)
Frame
Insert the release pin into the hole in
the bottom of the frame and pull out
to remove the frame.
(When reattaching the frame, point
the side with a groove downwards
and attach it.)
Fig. 9
2. Fastening the unit to the factory radio mounting bracket.
(Fig. 10) (Fig. 11)
Select a position where the screw holes of the bracket and
the screw holes of the head unit become aligned (are fitted),
and tighten the screws at 2 places on each side. Use either
binding screws ( 5 x 6 mm) or flush surface screws
( 5 x 6 mm), depending on the shape of the screw holes in
the bracket.
Fig. 10
Factory radio mounting bracket
Fig.11
<ENGLISH>
iLbout the fixing screws for the front panel
If you do not operate the removing and attaching the front panel function, use the supplied
fixing screws and fix the front panel to this unit.
Fixing screw
Fig. 12