Pioneer SUPER TUNERIII DEH-P8500MP - Manual (Page 26)

Section
T Multi-CD Player
Playing a CD
You can use this unit to controi a muiti-CD
piayer, which is soid separateiy.
These are the basic steps necessary to play a
CD with your multi-CD player. More advanced
CD operation is explained starting on the next
page.
© Disc number indicator
Shows the disc currently playing.
® Play time indicator
Shows the elapsed playing time of the cur­
rent track.
@ Track number indicator
Shows the track currently playing.
1 Press SOURCE to select the multi-CD
player.
Press SOURCE until you see Multi-CD dis­
played.
2 Use VOLUME to adjust the sound level.
Rotate to increase or decrease the volume.
3 Select a disc you want to listen to with
the 1-6 buttons.
For discs located at 1 to 6, press the corre­
sponding number button.
If you want to select a disc located at 7 to 12,
press and hold the corresponding numbers
such as 1 for disc 7, until the disc number ap­
pears in the display.
■ You can also sequentially select a disc by
pressing
A/T.
4 To perform fast forward or reverse,
press and hold ◄ or ►.
5 To skip back or forward to another
track, press ◄ or ►.
Pressing ► skips to the start of the next track.
Pressing ◄ once skips to the start of the cur­
rent track. Pressing again will skip to the pre­
vious track.
Notes
When the muiti-CD player performs the pre­
paratory operations, Ready is displayed.
If the multi-CD player does not operate prop­
erly, an error message such as ERROR-11
may be displayed. Refer to the muiti-CD player
owner’s manual.
if there are no discs in the multi-CD player ma­
gazine, NO DISC is displayed.
When you select a CD TEXT disc on a CD TEXT
compatible multi-CD player, the disc and track
titles begin to scroll to the left auto­
matically.®
50-disc multi-CD player
Only those functions described in this manual
are supported for 50-disc multi-CD players.®
En