Upper threading – Brother X L 2010 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Upper threading
9
1. Raiw th« pr«s««r foot l«v«r.
2. Raiso the needle to its high’-
est position by turning the
balance wheel toward you.
{Large}
(Small)
PiBca
a
thread
^wol
on
horizontal spool pin.
Choose an appropriate spoof
holder according to type and
diameter of spool being used.
(The diameter of spool holder
should be larger than that of
the spool itself)
Press the spool holder firmly
to the spool.
7. Make sure to guide the
thread through thread-take-
up lever from right to left.
6. Deliver the upper thread as Illustrated.
Advertising