Stitch length 2-3, Foot, Zipper foot – Brother X L 2010 User Manual
Page 25: Using attachments and appucations, Zipper insertion
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
USING ATTACHMENTS AND APPUCATIONS
Zipper insertion ;______
Stitch Length
2-3
Foot____
Zipper Foot
Zipper foot is used to sew vari
ous types of zippers and can
easily be positioned to right or
left side of needle. When zipper
is sewn at right side of the nee
dle, place the zipper foot by
loosening thumb screw and slid
ing zipper foot to the left.
When the zipper is sewn at left
side of needle, place the zipper
foot by loosening thumb screw
and sliding zipper foot to the
right.
1. Lower needle into side notch
located on the presser foot
(right or left).
2. Tighten the thumb screw to
lock presser foot into position.
3. To sew opposite side of zip
per loosen thumb screw and
place the zipper foot (right or
left.)
22