Remove the power supply plug from the outlet, Maintenance, Changing the needle – Brother X L 2010 User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
MAINTENANCE
Changing the needle
25
• Remove the power supply plug from the outlet.
• How to check the needle.
1. Remove the needle
Lower the presser foot
loosen the screw,
and
Inserting the needle
With the flat side facing back,
insert the needle as far as it
will go against the needle
stopper. Tighten the screw.
for smooth sewing.
as shown
right.
in illustration at
Advertising