Brother INSTAFAX FAX2100M - Manual (Page 41)

III-3. ASSEMBLING THE HANDSET
3. CONNECTING THE HANDSET
1) Insert the handset line cord into the base of the handset as
shown. Listen for the dick which will indicate that the plug is
securely in position.
2) Draw the handset line cord through the gap provided to
prevent the cord from being pinched between the base and the
fax unit. Set the fax unit on its side, so the slot for sliding the
handset base into position is accessible. Insert the handset into
the slot provided. Insert until the handset base is fixed in
position.
III-3-1