Brother INTELLIFAX 710M - Manual (Page 10)

^L. wr rKcr/AKMI IkJIN bthOkb USt
Packing List
Please check to see that you have the following items;
Receive wire extension
Follow these steps to set up your fax machine;
1. Load the recording paper.
1) Lift up the machine top cover p)
by placing your finger in the
groove on the right-hand side
of the fax machine and lifting
up.
2) Pull the release levers (blue)
on both sides of the print head
cover (black) so that you can
lift it up and remove the re­
cording paper,
3) Take the new roll of record­
ing paper out of its wrapper.
If
you are replacing a roll, you
need to remove any paper
remaining in the machine.
4) Insert the new recording pa­
per into the paper bin, with
the paper coming over the
top of the roll.
5) Insert the edge of the paper
into the slot that says “ ”
and pull the paper out about
10cm (4 inches) from the back
side. Make sure paper is fed
over the ACS bar. Adjust the
recording paper so that it is
between the marks.
Correct Incorrect
Recording Paper
1-2